JVC LVT1364-006B manual Playing Back Tapes, English, Playing Back a Tape, Press PUSH OPEN

English

Playing Back Tapes

Playing Back a Tape

You can play back type I tapes only.

1 Press PUSH OPEN.

The cassette holder opens. PUSH OPEN

2

If no cassette is inserted when you press TAPE ¤ ‹

“NO TAPE” appears on the display.

UP

To stop playing, press 7.	PRESET
	GROUP
	DOWN
	PRESET
	GROUP

DOWN		UP
4	7	¢

UP

To fast-wind to the left or to the right, PRESET

GROUP

press ¢ or 4 (or UP ¢ or DOWN

4 on the unit).DOWN

PRESET

Put a cassette in with the exposed part of the tape down.

The tape direction indicator ( 3 or 2 ) starts flashing rapidly on the display.

GROUP

DOWN		UP
4	7	¢

To remove the cassette, press PUSH OPEN on the unit while playback is stopped.

PUSH OPEN

3 Close the cassette holder gently.	To play both sides—Reverse Mode
	You can set the deck to play just one side of a tape, both sides
	once, or both sides continuously.
	On the remote control ONLY:
	Press REV.MODE (reverse mode).	REV.MODE
	• Each time you press the button, the Reverse
	Mode changes as follows:

•When a tape is inside of the cassette holder, the tape direction indicator ( 3 ) lights up on the display.

4 Press TAPE ¤ ‹. TAPE

Playback starts (if the unit has been on standby, the unit automatically turns on). The tape direction indicator ( 3 or 2 ) starts flashing slowly on the display.

•Each time you press the button, the tape direction changes:

3: plays the front side.

2: plays the reverse side.

When the tape plays to the end, the deck automatically

stops if the Reverse Mode is set to or . (See “To play both sides—Reverse Mode.”)

: The deck automatically stops after playing both sides of the tape. Stops when playback in the 2 directions are finished.

: The deck continues to play both sides of the tape 10 times, then stops playback automatically.

: The deck automatically stops after playing one side of the tape.

• DO NOT turn off the unit while playing back or recording a tape. The cassette deck or tapes may be damaged.

•The use of C-120 or longer tape is not recommended, since characteristic deterioration may occur and this tape easily jams in the pinch rollers and the capstans.

•This unit is not compatible with type II and type IV tapes.

15