JVC LVT1364-006B manual Using an External Equipment, English, Tuning in to a Preset Station, “Am.”

English

3	Press PRESET GROUP or	UP
		PRESET
		GROUP
	PRESET GROUP to select a	DOWN
	preset number, then press SET.
		PRESET
		GROUP

The preset station is stored in memory.

•Even if you do not press SET, the station will automatically be stored on the selected preset number 5 seconds later.

MHz

PRGM

Tuning in to a Preset Station

On the remote control ONLY:

1 Press FM/AM to select either “FM” or FM/AM

“AM.”

The unit automatically turns on and tunes in to the previously received station—either FM or AM.

•Each time you press the button, the band alternates between FM and AM.

2	Press PRESET GROUP or	UP
		PRESET
		GROUP
	PRESET GROUP repeatedly

You can also use the number button(s) to select a preset number.

•In this case, you do not have to press SET.

Ex.: To select a preset number 5, press 5.

To select a preset number 15, press OVER, then press 1, 5. To select a preset number 20, press OVER, then press 2, 0.

1 2 3

4 5 6

7 8 9

OVER

0

to select a preset number.	DOWN
	PRESET
	GROUP

To tune in to a preset station directly using the number buttons

On the remote control ONLY:

4 To preset more stations, repeat steps 1 to 3 above, allocating a different preset number to each station.

•Storing a new station on an already assigned number erases the previously stored one.

When you unplug the AC power cord or if a power failure occurs

The preset stations will remain in the unit.

Pressing the number button(s) allows	1
you to select the preset number you
want.	4
Ex.: For preset number 5, press 5.
For preset number 15, press	7
OVER, then press 1, 5.

For preset number 20, press OVER, then press 2, 0.

2 3

5 6

8 9

OVER

0

Using an External Equipment

Listening to the External Equipment

You can listen to the external equipment such as MD recorder, cassette deck, or other auxiliary.

•First, make sure that the external equipment is properly connected to the unit. (See page 7.)

1 Set the volume level to the minimum position.

2 Press AUX. AUX

“AUX” appears on the display.

3 Start playing the external equipment.

4 Adjust the volume level to the level you want to listen to.

To exit AUX mode, select other source.

For operation of the external equipment

Refer to its instructions.

17