Manual background

Getting Started

Do not connect the AC power cord until all other connections have been made.

Continued Manual background

Unpacking

After unpacking, check to be sure that you have all the following items.

The number in parentheses indicates the quantity of each piece supplied.

AM loop antenna (1)

Remote control (1)

Batteries (2)

If any item is missing, consult your dealer immediately.

Connecting AM and FM Antennas

1 AM loop antenna (supplied)

FM

 

ANTENNA

 

AM

2 FM antenna

LOOP

 

1Connect the supplied AM loop antenna to the

AM LOOP terminal.

Place the antenna away from the unit and adjust its position for the best reception.

2Adjust the position for the FM antenna for the best reception.

For better reception of both FM and AM

Make sure the antenna conductors do not touch any other terminals or connecting cords.

Keep the antennas away from metallic parts of the unit,

connecting cords, and the AC power cord.

Connecting Speakers

You can connect the speakers using the speaker cords.

1

2,3

Ò

Black

 

Red

Â

 

Red

 

Speaker

Speaker

cord

cord

Black

 

Right speaker

Left speaker

1Hold the clamp of the speaker terminal.

2Insert the end of the speaker cord into the

terminal.

Match the polarity of the speaker terminals: red cord to

ªand black cord to ·.

3Release your finger from the clamp.

IMPORTANT:

Use only speakers with the same speaker impedance as indicated by the speaker terminals on the rear of the unit.

DO NOT connect more than one speaker to one speaker terminal.

6

Page 95
Image 95
JVC LVT1364-006B manual Getting Started, Unpacking, Connecting AM and FM Antennas, Connecting Speakers, AM LOOP terminal