■General (continued)

Problem

Possible cause

Possible solution

Reference

page

 

 

 

 

 

 

 

No sound is produced.

The speakers are not con-

Connect the speakers correctly.

6

 

nected correctly.

 

 

 

 

 

 

 

 

 

Headphones are connected.

Disconnect the headphone plug.

13

 

 

 

 

 

The sound is turned off.

Restore the sound.

12

 

 

 

 

 

If “NO AUDIO” is displayed in

Check the disc at the store where

 

 

the display window, the disc

it was purchased.

 

may have been produced

 

 

 

 

 

through illegal copying.

 

 

 

 

 

 

The sound is weak and

The volume level is low.

Increase the volume level.

12

can hardly be heard.

 

 

 

 

 

The sound is distorted.

The volume is too high.

Turn down the volume.

12

 

 

 

 

A radio broadcast has

The antennas are not con-

Connect the antennas correctly.

 

interference from noise.

nected correctly.

 

5

 

 

 

A radio broadcast can-

 

 

 

 

 

not be received.

 

 

 

 

 

 

 

A noise is produced

The internal cooling fan pro-

The noise is not a malfunction.

11

from the rear of the main

duces the noise as the fan

The cooling fan is used to prevent

unit.

rotates.

overheating of the main unit.

 

 

 

 

 

The HDMI CEC function

The connected TV is not com-

Refer to the operation manual of

 

does not work.

patible with the HDMI CEC

the TV.

 

function.

 

 

 

“OFF” is selected for the “CEC”

Select “ON 1” or “ON 2” for the

40

 

setting.

“CEC” setting.

 

 

When you disconnect

The previous connection setting

Select “OFF” for the “CEC” setting,

 

the HDMI cable and

is stored on the main unit.

and then select “ON 1” or “ON 2”

 

connect it again, the

 

again.

50

HDMI CEC function

 

 

 

does not work properly.

 

 

 

 

 

 

 

(Continued on the next page)

Reference

58