54
EN 
PLAYBACK Basic Connections
VCR/TV Connection (when connecting directly to the camcorder)
MIC | To AV OUT |
|
|
|
|
| |
To VIDEO/AUDIO IN |
| ||
|
| ||
Open the | connectors |
|
|
| Yellow to VIDEO | To | |
jack cover. |
|
| |
| VIDEO/AUDIO cable | White to AUDIO L | TV or VCR |
|
| ||
| (provided) |
|
|
| (ø3.5, camcorder to | Red to AUDIO R |
|
| TV or VCR) |
|
|
VCR
1 CONNECTVCR CAMCORDER TO TV OR
Pull out the jack cover and open it. Connect as shown in the illustration.
If Using A VCR . . . go to step 2.
If not . . . go to step 3.
2 CONNECTINPUT VCR OUTPUT TO TV Refer to your VCR’s instruction manual.
3 TURN ON POWER
Turn the Power Dial to “PLAY” and turn on the TV/VCR.
4 SELECT TV’S VIDEO MODE
Set the TV to the channel or mode appropriate for video playback.
To choose whether or not the following displays appear on the connected TV . . .
• Date/Time, Time Code
.... set to “ON” or “OFF” in the Playback Menu
(☞ pg. 52).
• Playback Sound Mode Display
.... Press the MENU button, and set “ON
SCREEN” in the Date/Time Menu (☞ pg. 11) to “ON” or “OFF”. Then set the Power Dial back to “PLAY”.
NOTES:
●Turn on the TV/VCR after connection is com- pleted. Otherwise damage to this unit and other equipment may result.
●Input mode setting varies depending on the type of TV used. Refer to your TV’s instruction manual.
●Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.
●To keep the camcorder's display from appearing on the TV screen during playback, press the IND.ON/OFF button for longer than 1 second.
●It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the battery pack. (☞ pg. 10)
●Never connect any other VIDEO/AUDIO cable than the provided VIDEO/AUDIO cable to the camcorder’s AV OUT jack.
