JVC LYT0191-001B specifications Displaying The Date And Time During Recording, Select Function

RECORDINGAdvancedFeaturesEN25

Displaying The Date And Time During Recording

When the Power Dial is set to “ M ”, “5S” or “ ”, you can choose whether to display the date and time

during recording or not. You must first set the date and time (see “Date/Time Settings” ☞ pg. 11). Set “DISPLAY” to “ON” in the Date/Time Menu. The Date/Time is always displayed when the Power Dial is set

to “	A	”.
		Display

Lock button

5S
M	OFF Y
A		P
	AL

Power Dial

MENU button/

IND. ON/OFF button

Select Dial

REC MODE	SP
WIDE MODE	OFF
ZOOM	40X
DIS	ON
GAIN UP	AGC

4TO DATE / TIME MENU TO SYSTEM MENU

END

Recording Menu

ON SCREEN	OFF
DISPLAY	ON
DATE / TIME	1	. 1 . 00
		0 : 00

4RETURN

Date/Time Menu

SELECT OPERATION MODE
1 First turn the Power Dial to “	M	” while pressing

down the lock button located on the dial, make sure the LCD monitor is open fully or the viewfinder is pulled out.

2 ACCESS RECORDING MENU Press MENU. The Recording Menu appears.

3 ACCESS DATE/TIME MENU Move the pointer and highlight bar to “TO DATE/TIME MENU” by rotating the Select Dial. Press it and the Date/Time Menu appears.

4 SELECT FUNCTION

Move the pointer and highlight bar to “DISPLAY” by rotating the Select Dial, then press it. The pointer stops blinking, indicating that the function has been selected.

5 SET FUNCTION PARAMETERS Cycle through the available settings of the selected functions by rotating the Select Dial and stop when the one you want is displayed. Then press it and the pointer and highlight bar automatically move to “RETURN”.

6 CLOSE RECORDING MENU Press the Select Dial twice. Selection is complete and the menu disappears.

NOTES:

●Connect the camcorder to a TV and set “ON SCREEN” to “ON” in the Date/Time Menu. The display appears on the connected TV .

●The Indicator/Display function overrides these settings. Even if you have set “ON SCREEN” to “ON”, pressing the IND.ON/OFF button for longer than 1 second removes the indications from the screen. Pressing it for longer than 1 second again makes the indications re-appear.