JVC LYT0191-001B specifications Indications Function, Tape END, Set Date/Time, E01 E06

EN81

Warning Indications

INDICATIONS FUNCTION

Displays the battery remaining power.

Remaining power level: high

Remaining power level: exhausted

As the battery power comes close to nil, the battery indicator blinks. When the battery power is exhausted, power turns off automatically.

	Appears when no tape is loaded, or when the erase	(☞ pg. 12)
	protection tab is set to “SAVE”.
	Appears if dirt is detected on the heads during recording. (☞ pg. 83)
	Appears if condensation occurs. When this indication is displayed,
	the camcorder turns off automatically.
TAPE!	Appears for 10 seconds after power is turned on if there's no tape
	loaded.
TAPE END	Appears when the tape ends during recording	(☞ pg. 22)
	or playback.
SET DATE/TIME!	● Appears when the date/time is not set.	(☞ pg. 11)
	● Appears when the built-in rechargeable battery is	(☞ pg. 11)
	discharged and the previously set date/time is erased.
ERROR!	Appears when Audio Dubbing is unavailable.	(☞ pg. 68)
REFER MANUAL
E01 — E06	The error indications (E01 — E06) show what type of malfunction has
	occured. When an error indication appears, the camcorder turns off
	automatically. Press the reset button after removing the power supply
	(battery, etc.), and wait a few minutes for the indication to clear.
	When it does, you can resume using the camcorder. If the indication
	remains, consult your nearest JVC dealer.	(☞ pg. 74)