Adaptec PCI Ethernet and Fast Ethernet Adapters manual Adapter Specifications

▼ ▼ ▼ ▼ A

Adapter Specifications

ANA-6901 and ANA-6901 Combo

Bus Interface	PCI, 32-bit bus master
Hardware Interrupts	PCI INTA, supports shared interrupts
Base I/O Addresses	Assigned by BIOS
Ethernet Node ID Number	0000D1xxxxxx
Power Requirements	+ 5 volts @ 0.5 Amp. max. (TP)
	+ 5 volts @ 1 Amp. max. (Combo)
Environmental
Operating Temperature	0× C to 50× C
Humidity	5% to 85% non-condensing
Altitude	3000m maximum
Network Interface	Ethernet IEEE 802.3 10BASE-T
Standards
	Ethernet IEEE 802.3 10BASE-2
	(Combo only)
Certifications	FCC Class B
	CE Class B
Network Speeds Supported	10 Mb/s
	20 Mb/s Full Duplex (RJ-45 only)
Network Connectors	RJ-45 female, BNC
Physical Dimensions	4.875" x 2.875" (conforms to PCI
	Short Card specification)
Diagnostic LEDs	Link status (green) normally on for
	RJ-45 connector
	Network activity (yellow) on when
	activity detected

A-1

PCI Ethernet and Fast Ethernet Adapters User’s Guide

Stock Number: 511472-00, Rev. A	Page: A-1
Print Spec Number: 496708-00
Current Date: 5/5/97	ECN Date: 5/97