Adaptec PCI Ethernet and Fast Ethernet Adapters manual Configuring the IP Addresses

Installing Network Drivers

ADAPTEC: Installation Complete

ADAPTEC: Please Reboot the system for the changes to take effect.

Note: The system lists an EMPCI address for each of the ANA-6944A/TX ports.

8Reboot the system.

Configuring the IP Addresses

1To begin configuring the IP Addresses for the ANA-6944A/TX, enter:

/etc/confnet.d/configure -i

The system lists the devices and displays the following message:

These are the devices available on your system:

1EMPCI_0

2EMPCI_1

3EMPCI_2

4EMPCI_3

Type the number of the device(s) to be configured with inet [?,??,quit]:

2 For the ANA-6944A/TX, enter the four addresses, using spaces in between the numbers (no commas):

1 2 3 4

The system displays the following message:

Please enter the IP host name for device EMPCI_0 (default: xxx):

3Enter the name of the host (string). The system displays the following message:

Please initialize the IP address for the host xxx (default: xxx.xx.xx.xx):

4Enter the IP address, or press Enter to use the default IP address. The system displays the following message:

Configure host xxx with the default Ethernet (TM) if config options?: (yes no ClassC BerkeleyC info; default:info):

4-31

PCI Ethernet and Fast Ethernet Adapters User’s Guide

Stock Number: 511472-00, Rev. A	Page: 4-31
Print Spec Number: 496708-00
Current Date: 5/5/97	ECN Date: 5/97