Adaptec PCI Ethernet and Fast Ethernet Adapters manual Getting Started, System Requirements

▼ ▼ ▼ ▼ 1

Getting Started

This document contains information about installing and configuring the Adaptec® LAN adapters. These adapters are engineered for high-speed networking in IEEE 802.3 Ethernet and IEEE 802.3u Fast Ethernet networks.

Procedures in this document describe installing the adapter, installing and configuring the adapter drivers, and troubleshooting the Adaptec LAN adapters.

System Requirements

The minimum system requirements for using the Adaptec LAN adapters and for running the EMDIAG Diagnostics Utility are as follows:

System Component	Requirements
PCI adapter	Available bus mastering PCI slot; most recent PCI
	system BIOS recommended
Quartet adapter	System BIOS supporting PCI-to-PCI bridge chip
with Windows NT
EMDIAG program	MS-DOS 3.3 or later

1-1

PCI Ethernet and Fast Ethernet Adapters User’s Guide

Stock Number: 511472-00, Rev. A	Page: 1-1
Print Spec Number: 496708-00
Current Date: 5/5/97	ECN Date: 5/97