Adaptec PCI Ethernet and Fast Ethernet Adapters manual ANA-6911/UC Ultimate Combo

		Adapter Specifications
ANA-6911/UC Ultimate Combo
	Bus Interface	PCI 32-bit bus master
	Hardware Interrupts	PCI INTA, supports shared interrupts
	Base I/O Addresses	Assigned by BIOS
	Ethernet Node ID Number	000092xxxxxx
	Power Requirements	+ 5 volts @ 3 Amp. max, or
		+3.3 volts @ 5 Amp. max
	Environmental
	Operating Temperature	0× C to 50× C
	Humidity	5% to 85% non-condensing
	Altitude	3000m maximum
	Network Interface	Ethernet IEEE 802.3 10BASE-T
	Standards
		Ethernet IEEE 802.3 10BASE-2
		Ethernet IEEE 802.3 10BASE-5
		Ethernet IEEE 802.3u 100BASE-T4
		Ethernet IEEE 802.3u 100BASE-TX
	Certifications	FCC Class A
		CE Class A
	Network Speeds Supported	10 Mb/s
		20 Mb/s Full Duplex
		100 Mb/s
		200 Mb/s Full Duplex (TX only)
	Network Connectors	RJ-45 female, BNC, AUI
	Physical Dimensions	6" x 3.9" (conforms to PCI Short Card
		specification)
	Diagnostic LEDs	Link status 10/100 (yellow/green)
		normally on
		Network activity (yellow) on when
		activity detected

A-7

PCI Ethernet and Fast Ethernet Adapters User’s Guide

Stock Number: 511472-00, Rev. A	Page: A-7
Print Spec Number: 496708-00
Current Date: 5/5/97	ECN Date: 5/97