Installing Network Drivers

5Extract the driver files, as follows: tar -xvf-d adaptec\empci.tar

6Enter the Software Manager window, as follows: custom

7On the Software menu, select Install new.

8Select the host (computer) you want to install from, and

click Continue. The default host is the computer on which you are working.

9In the Select Media dialog box select media images and click Continue.

10Enter the directory path for the directory containing the media images (/adaptec), and click OK.

11Select Full installation, and click OK.

The program displays the progress of the installation, and displays a message box telling you when you are finished. If the installation was successful, the driver name will be listed in the Software Man- ager window.

Configuring the SCO OpenServer Driver

Once the driver is installed, you can configure the driver for the ANA-6911A/TX, ANA-6901, or the ANA-6944A/TX.

1In the System Administration window, double-click the Networks icon.

2Open the Network Configuration Manager.

3On the Hardware menu, select Modify Hardware Configuration.

4Make the necessary changes in the Network Driver Configuration window, and select OK.

5On the Hardware menu, select Exit.

6Relink, and reboot the system.

4-29

PCI Ethernet and Fast Ethernet Adapters User’s Guide

Stock Number: 511472-00, Rev. A

Page: 4-29

Print Spec Number: 496708-00

 

Current Date: 5/5/97

ECN Date: 5/97

Page 57
Image 57
Adaptec PCI Ethernet and Fast Ethernet Adapters manual Configuring the SCO OpenServer Driver