10 EN

CAPTURING VIDEO

Capturing video in real time

When a camcorder is connected to the PC with a USB cable, the video from the camcorder can be recorded on the PC’s hard drive instead of on tape or in a memory card (real-time capture).

1Connect the camcorder to the PC with a USB cable.

●Refer to “Connections (Windows®)” ( pg. 9) or “Connections (Macintosh)” ( pg. 13) in the Software Installation and USB Connection Guide.

2Set the camcorder to the memory card recording mode.

The camcorder is now on.

[Web CAMERA] appears on the camcorder’s LCD monitor.

●If [Web CAMERA] does not appear, install [USB Stream driver]. Refer to “Software Installation (Windows®)” ( pg. 5) and “Software Installation (Macintosh)” ( pg. 14) in the Software Installation and USB Connection Guide.

●Camcorder operations are limited to the zoom switch, the focus button, and the still image button.

NOTE:

The procedure is different when reading or writing a memory card.

3Select [Start] – [Programs] – [Pixela] – [ImageMixer] – [PIXELA ImageMixer Ver.1.0].

●For Macintosh, double-click the

[ImageMixer] icon on the PC. ImageMixer starts up.

4 Click the Input button.

The input mode screen appears.

Input

 

CONTINUED ON NEXT PAGE