EN 13 |
Copying video
1Click the Video button.
The amount of available storage space is displayed in the information display panel.
2Click the Play button.
The camcorder begins playing back the video, and the same image appears on the PC screen.
3Click the Capture button.
The capture operation begins, and the message [Video capture in progress] appears.
4 Click the Capture button again.
The capture operation ends, and the message [Converting to MPEG] appears. Once conversion ends, the video file (extension “.mpg”) is registered in the album.
●The camcorder stops playback automatically.
NOTES:
● If you are using Windows® 2000 and the MPEG1 files cannot be converted to MPEG4 files with ImageMixer, install Windows Media™ Player
(version 7 or later). Windows Media™ Player can be loaded from Microsoft’s web site: http://www.microsoft.com/
● The signals output from the camcorder’s DV connector have an aspect ratio different from the signals for the PC screen. In the Digital video camera input mode screen, the image displayed on the PC screen looks vertically stretched in comparison with those on the camcorder’s LCD monitor or on the TV connected to the camcorder.
Disconnecting the DV cable
1Disconnect the DV cable.
2Set the Power Switch on the camcorder to “OFF”.
The camcorder turns off.
NOTES:
●To copy a video as a still image, click the Still image button in step 1 of “Copying video” and perform steps 2 – 4.
●It is not possible to capture video keeping DV format. Use other DV capture application software available.