5Click the USB input (USB) button.
The USB input mode screen appears.
6Click the Video button.
The amount of available storage space is displayed in the information display panel.
7Click the Capture button.
The capture operation begins, and the message [Capture in progress] appears.
8Click the Capture button again.
The capture operation ends, and the message [Converting to MPEG] appears. Once conversion ends, the video file (extension “.mpg”) is registered in the album.
NOTE:
If you are using Windows® 2000 and the MPEG1 files cannot be converted to MPEG4 files with ImageMixer, install Windows Media™ Player (version 7 or later). Windows Media™ Player can be loaded from Microsoft’s web site: http://www.microsoft.com/
Capturing still images
1Click the Still image button.
The message [Still image capture enabled] appears on the information display panel.
2Click the Capture button.
The video image at the moment that the button was clicked is captured, and the resulting still image file (extension “.jpg”) is registered in the album.
● Camcorder operations are limited to the
zoom switch, the focus button, and the still |
| Capture | ||
| ||||
|
| |||
image button. |
|
|
|
|
|
|
| ||
●It is not possible to capture videos or still images if the USB Mass Storage Class driver is not installed properly. In this case, refer to “Updating
[Device Manager] (Windows®)” ( pg. 8) in the
Software Installation and USB Connection Still image Information display panel Guide.
●On the information display panel or the file information dialog, some information such as
Disconnecting the USB cable
1Disconnect the USB cable.
2Set the Power Switch on the camcorder to “OFF”.
The camcorder turns off.