Fade/Wipe Effects
These effects let you make
Fade or Wipe works when tape recording is started or when you stop recording.
1 Set the VIDEO/MEMORY Switch 4 to “VIDEO”, then set the Power Switch u to “ 
” while pressing down the Lock Button y located on the switch. Open the LCD monitor fully or pull out the viewfinder fully.
2 Press the MENU/VOLUME wheel % in. The Menu Screen appears.
3 Rotate the MENU/VOLUME wheel % to select
“
WIPE/FADER”, then press it.
4 Rotate the MENU/VOLUME wheel % to select the desired function, then press it. Selection is complete. Press the MENU/VOLUME wheel % in again.
•The WIPE/FADER Menu disappears and the effect is reserved. The indicator representing the selected effect appears.
5 Press the Recording Start/Stop Button e to activate the
To Deactivate The Selected Effect . . .
..... select “OFF” in step 4.
IMPORTANT
Some Fade/Wipe Effects cannot be used with certain modes of Programme AE with special effects ( pg. 23). If an unusable Fade/Wipe Effect is selected, its indicator blinks or goes out.
NOTE:
You can extend the length of a Fade or Wipe by pressing and holding the Recording Start/Stop Button e.
FADER — WHITE
Fade in or out with a white screen.
FADER — BLACK
Fade in or out with a black screen.
FADER — B.W
Fade in to a colour screen from a black and white screen, or fade out from colour to black and white.
WIPE — CORNER
Wipe in on a black screen from the upper right to the lower left corner, or wipe out from lower left to upper right, leaving a black screen.
WIPE — WINDOW
The scene starts in the centre of a black screen and wipes in toward the corners, or comes in from the corners, gradually wiping out to the centre.
WIPE — SLIDE
Wipe in from right to left, or wipe out from left to right.
WIPE — DOOR
Wipe in as the two halves of a black screen open to the left and right, revealing the scene, or wipe out and the black screen reappears from left and right to cover the scene.
WIPE — SCROLL
The scene wipes in from the bottom to the top of a black screen, or wipes out from top to bottom, leaving a black screen.
WIPE — SHUTTER
Wipe in from the centre of a black screen toward the top and bottom, or wipe out from the top and bottom toward the centre leaving a black screen.
^
%
e
y u
EN
24 FOR RECORDING
