JVC LYT1145-001A manual Select Scenes

●Make sure to set “S/AV INPUT” to “OFF” in the Menu Screen (GR-D70 only,  pg. 31).

●Set the video out select switch of the cable adapter as

required:

Y/C : When connecting to a TV or VCR which accepts

Y/C signals and uses an S-Video cable.

CVBS : When connecting to a TV or VCR which does not accept Y/C signals and uses an audio/video cable.

●When editing on a VCR equipped with a DV input connector, an optional DV cable can be connected instead of an S-Video cable and audio/video cable.

	To AV (
	Connector
	cover**
	To
	S-VIDEO q
To EDIT )	Audio/Video cable
S-Video cable	(provided)
(optional)
	To AUDIO, VIDEO*
	and -IN
Editing cable***	connectors
“Y/C”/“CVBS”	If your VCR has the
video out	SCART connector,
select switch	use the provided

cable adapter.

To Remote PAUSE or R.A.EDIT

SELECT SCENES

4 Point the remote control at the camcorder’s remote sensor. Press PLAY (4) ) and then press R.A.EDIT ON/OFF r on the remote control.

The Random Assemble Editing Menu appears.

		I N	OUT	MODE	Random
	1 – – – – : – –		~
	2		~		Assemble
	3		~		Editing Menu
Programme	4		~
	5		~
	6		~
	7		~
	8		~
		T I ME CODE	– – : – –
		TOTAL	00 : 00

5 If using a Fade/Wipe at the beginning of the scene, press FADE/WIPE 9 on the remote control.

•Cycle through the effects by pressing repeatedly, and stop when the one you want is displayed.

6 At the beginning of the scene, press EDIT IN/OUT

@on the remote control. The Edit-In position appears in the Random Assemble Editing Menu.

7 At the end of the scene, press EDIT IN/OUT @. The Edit-Out position appears in the Random Assemble Editing Menu.

8 If using a Fade/Wipe at the end of the scene, press FADE/WIPE 9.

•Cycle through the effects by pressing repeatedly, and stop when the one you want is displayed.

•If you select a Fade/Wipe effect for an Edit-Out point, the effect is automatically applied to the following Edit-In point.

•When you use Fade/Wipe effects, that time is included in the total time.

9 If using Playback Special Effects, press EFFECT ! ( pg. 35).

To PAUSE IN $
	4
9	)
!	r
@
	#

VCR

TV

10 Repeat steps 6 through 9 to register additional scenes.

•To change previously registered points, press CANCEL # on the remote control. The registered points disappear, one at a time, from the most recently registered point.

•If you are not using Fade/Wipe or Programme AE with special effects, repeat steps 6 and 7 only.

NOTES:

*Connect when an S-Video cable is not used.

**When connecting cables, open this cover.

***Provided with the optional Remote Control kit RM-V717KITU.

EN

●When choosing a scene, set Edit-In and Edit-Out points so that there is a relatively large difference between them.

●If the search time for an in-point exceeds 5 minutes, the recording deck’s Record-Standby mode will be cancelled and editing will not take place.

●If there are blank portions before or after the Edit-In and Edit-Out points, a blue screen may be included in the edited version.

●Since time codes register time only as accurately as seconds, the time code total time may not match the total programme time exactly.

●Turning off the camcorder’s power erases all registered Edit-In and Edit-Out points.

38 USING THE REMOTE CONTROL UNIT