CARD ERROR!

Appears when the camcorder does not recognize the loaded memory card. Remove the memory card once and insert it again. Repeat these procedures until no indication appears. If the indication still appears, the memory card is corrupted.

UNSUPPORTED FILE!

Appears if a file in another format is selected.

CHECK CARD’S WRITE PROTECTION SWITCH

Appears when you attempt to record on a SD Memory Card with its write/erase protection tab in the “LOCK” position.

Appears when you attempt Memory Card menu operation using a SD Memory Card with its write/ erase protection tab in the “LOCK” position.

E01, E02 or E06 UNIT IN SAFEGUARD MODE

REMOVE AND REATTACH BATTERY

The error indications (E01, E02 or E06) show what type of malfunction has occured. When an error indication appears, the camcorder turns off automatically. Remove the power supply (battery, etc.) and wait a few minutes for the indication to clear. When it does, you can resume using the camcorder. If the indication remains, consult your nearest JVC dealer.

E03 or E04 UNIT IN SAFEGUARD MODE EJECT

AND REINSERT TAPE

The error indications (E03 or E04) show what type of malfunction has occured. When an error indication appears, the camcorder turns off automatically. Eject the cassette once and re-insert it, then check if the indication clears. When it does, you can resume using the camcorder. If the indication remains, consult your nearest JVC dealer.

EN

INDEX 53

Page 53
Image 53
JVC LYT1145-001A manual Appears if a file in another format is selected, E01, E02 or E06 Unit in Safeguard Mode