GETTING STARTED
12 EN
MasterPage: Left
1AC Adapter AP-V14U or AP-V18U
2Battery Pack BN-VF707U
3Audio/Video Cable (ø3.5 mini-plug to RCA
plug)
4USB Cable
5Core Filter (for USB cable, pg. 13 for
attachment)
6CD-ROM
7Remote Control Unit RM-V720U
8Lithium Battery CR2025* (for remote control
unit)
9Memory Card (Already inserted in the
camcorder)
!Shoulder Strap (see the right column for
attachment)
"Lens Cap (see the right column for
attachment)
* A lithium battery is pre-installed in the Remote
Control Unit at time of shipment (with insulation
sheet). To use the Remote Control Unit, remove
the insulation sheet.
NOTES:
●In order to maintain optimum performance of the
camcorder, provided cables may be equipped with
one or more core filter. If a cable has only one core
filter, the end that is closest to the filter should be
connected to the camcorder.
●Make sure to use the provided cables for
connections. Do not use any other cables.

How To Attach The Lens Cap

To protect the lens, attach
the provided lens cap to the
camcorder as shown in the
illustration.
NOTE:
To confirm the lens cap is on
correctly make sure the cap is
flush to the camcorder.

How To Attach The Shoulder Strap

Follow the illustration.
1Thread the strap through the eyelet.
2Fold it back and thread it through the strap
guide and the buckle.
●To adjust the length of the strap, loosen and then
tighten the strap in the buckle.
3Slide the strap guide fully towards the eyelet.
Provided Accessories
OR
Place here during
shooting.
3
2
2
1
Strap guide
Buckle
Eyelet
GR-D390US.book Page 12 Wednesday, June 21, 2006 9:55 AM