JVC LYT1528-001B, 0206ASR-NF-VM manual Date/Time Settings, Information

16 EN GETTING STARTED
Power-Linked Operation		Date/Time Settings
When the Power Switch is set to “REC”, you can		The date/time is recorded onto the tape at all
also turn on/off the camcorder by opening/
		times, but its display can be turned on or off
closing the LCD monitor or pulling out/pushing in
		during playback. ( pg. 34, 35)
the viewfinder.
		1 Perform steps 1 – 5 in “Language Settings”
INFORMATION:
The following explanations in this manual		on the left column.
supposes the use of LCD monitor in your		2 Press 3, 4, 2 or 1 to select “CLOCK ADJ.”,
operation. If you want to use the viewfinder,		and press SET. The date display format is
close the LCD monitor and pull out the		highlighted.
viewfinder fully.		3 Press 3 or 4 to select the desired date
Language Settings		display format, then press SET or 2. Select from
		“MONTH.DATE.YEAR”, “DATE.MONTH.YEAR”
The language on the display can be changed.		or “YEAR.MONTH.DATE”.
		4 Press 3 or 4 to select the time display
( pg. 31, 34)
1 Set the Power Switch to “REC” while pressing		format, then press SET or 2. Select from “24h”
		or “12h”.
down the Lock Button located on the switch.		5 Set the year, month, date, hour and minute.
2 Open the LCD monitor fully. ( pg. 19)
		Press 3 or 4 to select the value, then press SET
3 Set the recording mode to “M”.( pg. 15)		or 2. Repeat this step until you have input all the
4 Press MENU. The Menu Screen appears.		settings.
		NOTE:
5 Press 3, 4, 2 or 1 to
select “DISPLAY”, and	LANGUAGE	Press 1 to return to the previous setting.
		6 Press MENU.The Menu
press SET. The DISPLAY
Menu appears.		screen closes.	CLOCK ADJ .
6 Press 3, 4, 2 or 1 to	DEMO		MONTH . DATE . YEAR 1 2h
	0001
select “LANGUAGE”, and			DEC . 06 . 2 006
press SET.
			07 : 0 5 AM
7 Press 3 or 4 to select
the desired language, and	LANGUAGE
press SET or 2.
● Press 1 whenever you	ENGLISH
want to return to the	FRANÇAIS
previous menu screen.	ESPAÑOL
	PORTUGUÊS
8 Press MENU. The
Menu Screen closes.