32 EN Troubleshooting
Problem | Possible Cause | Remedy |
|
|
|
The tape is moving, but | • Your TV has AV input terminals, | Set the TV to the mode or channel |
there is no picture. | but is not set to its VIDEO mode. | appropriate for video playback. |
|
| ( 18) |
| • The cassette holder cover is open. | Close the cassette holder cover. |
|
| ( 13) |
|
|
|
Blocks of noise appear |
| Clean the video heads with an |
during playback, or |
| optional cleaning cassette. |
there is no playback |
| ( 2) |
picture and the screen |
|
|
becomes blue. |
|
|
Data battery status | • The AC Adapter is connected to | Disconnect the AC adapter from |
does not appear. | the camcorder. | the camcorder. |
| • The camcorder turned off | Turn the camcorder off, then on |
| automatically. | again. |
| Warning Indication | Meaning / Remedy | ||||||
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
| • Displays the battery remaining power. | |
| High | • As the battery power comes close to nil, the battery remaining power | ||||||
| indicator blinks. When the battery power is exhausted, power turns off | |||||||
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| automatically. | |
Exhausted | ||||||||
| ||||||||
|
|
|
|
|
|
|
| |
SET TO MANUAL | • Appears when you attempt to change “Menu Settings”, “Backlight | |||||||
MODE | Compensation” or “Manual Focus” while in AUTO mode A. ( 9) | |||||||
|
|
|
|
|
|
|
| |
| TAPE END | • Appears when the tape ends during recording or playback. | ||||||
|
|
|
|
|
|
|
| |
| LENS CAP | • Appears for 5 seconds after power is turned on if the lens cap is | ||||||
|
|
|
|
|
|
| attached or when it is dark. | |
|
|
|
|
|
|
|
| |
| SET DATE/TIME! | • Appears when the date/time is not set. | ||||||
|
|
|
|
|
|
| ( 12). | |
|
|
|
|
|
|
| • The | |
|
|
|
|
|
|
| has been erased. Consult your nearest JVC dealer for replacement. | |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
| • Appears if a tape is loaded while the Power Switch is set to “REC”. | |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| • Blinks when no tape is loaded. | |
|
|
|
|
|
|
|
| |
CHECK TAPE’S | • Appears when the erase protection tab is set to “SAVE” while the Power | |||||||
ERASE PROTECTION | Switch is set to “REC”. | |||||||
TAB |
| |||||||
|
|
|
|
|
|
|
| |
UNIT IN SAFEGUARD | • Error indications 01, 02 or 06. | |||||||
MODE REMOVE AND | Remedy: Remove and reattach the power supply or battery.* | |||||||
REATTACH BATTERY |
| |||||||
OR DC PLUG |
| |||||||
|
|
|
|
|
|
|
| |
UNIT IN SAFEGUARD | • Error indications 03 or 04. | |||||||
MODE EJECT AND | Remedy: Eject the cassette and reinsert.* | |||||||
REINSERT TAPE |
| |||||||
|
|
|
|
|
|
|
| |
*The camcorder turns off automatically.
