Dubbing To Or From A Video

Unit Equipped With A DV

Connector (Digital Dubbing)

It is also possible to copy recorded scenes from the camcorder onto another video unit equipped with a DV connector. Since a digital signal is sent, there is little, if any, image or sound deterioration.

Editing EN 29

Notes:

It is recommended to use the AC Adapter as the power supply instead of the battery pack ( 11).

If a blank portion or disturbed image is played back on the player during dubbing, the dubbing may stop so that an unusual image is not dubbed.

Even though the DV cable is connected correctly, sometimes the image may not appear in step 4. If this occurs, turn off the power and make connections again.

When using a DV cable, be sure to use the optional JVC VC-VDV204U or VC-VDV206U DV cable.

To use this camcorder as a recorder

1 Make sure all units are turned off.

Core filter

To DV IN/OUT

DV cable (optional)

To DV IN/OUT

2Connect this camcorder to a video unit equipped with a DV output connector using a DV cable as shown in the illustration.

3Set the camcorder’s Power Switch to “PLAY”.

4 Set “REC MODE” to “SP” or “LP” ( 23).

5 Start playback on the player.

6

Press the Recording Start/Stop Button to

 

 

engage the Record-Pause mode.

 

 

• The “

 

 

” indication appears on the

 

 

 

 

 

screen.

 

7

At the point you want to start dubbing,

 

 

press the Recording Start/Stop Button to

 

 

start

dubbing. The T indication rotates.

8

Press the Recording Start/Stop Button

Video unit equipped with DV connector

To use this camcorder as a player

1 Make sure all units are turned off.

2Connect this camcorder to a video unit equipped with a DV input connector using a DV cable as shown in the illustration.

3 Start playback on the camcorder ( 16).

4At the point you want to start dubbing, start recording on the video unit. (Refer to the video unit’s instruction manual.)

5To stop dubbing, stop recording on the video unit, then stop playback on this camcorder.

again to stop dubbing. The T indication

stops rotating.

9 Press 8 to return to the normal playback

mode.

Note:

Digital Dubbing is performed in the sound mode recorded on the original tape, regardless of the current “SOUND MODE” setting ( 21).

COPY PROTECTED

Appears if dubbing of copyguarded signals is attempted while this camcorder is being used as a recorder.

ENGLISH

Page 29
Image 29
JVC LYT1776-001A manual Unit Equipped With a DV, To use this camcorder as a recorder