18 EN Recording & Playback

Connections To A TV Or VCR

To AV connector

or

1 Make sure all units are turned off.

2Connect the camcorder to a TV or VCR as shown in the illustration.

If using a VCR, go to step 3 . If not, go to step 4 .

3Connect the VCR output to the TV input, referring to your VCR’s instruction manual.

4Turn on the camcorder, the VCR and the TV.

5Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.

6Start playback on the camcorder ( 16).

Please set “16:9 OUTPUT” of Playback Menus so that the image may suit your TV (16:9 TV or 4:3 TV) ( 21, 23).

Audio/Video cable

To choose whether or not the following

(provided)

displays appear on the connected TV

1

2

3

TV

VCR

 

 

 

1 Yellow to VIDEO IN (Connect when your TV/VCR has only A/V input connectors).

2 Red to AUDIO R IN

3 White to AUDIO L IN

Date/Time

Set “DATE/TIME” to “ON” or “OFF” ( 21).

Time Code

Set “TIME CODE” to “ON” or “OFF” ( 21).

On Screen

Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV” ( 21).

Notes:

It is recommended to use the AC Adapter as the power supply instead of the battery pack. ( 11)

To monitor the picture and sound from the camcorder without inserting a tape, set the camcorder’s Power Switch to “REC”, then set your TV to the appropriate input mode.

Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.

Conversion lens and AV Cable may not be used at the same time depending on the type of conversion lens you are using.

It is recommended to use JVC conversion lens. Some conversion lens may not be compatible with this camcorder.

Page 18
Image 18
JVC LYT1776-001A manual If using a VCR, go to . If not, go to step, Displays appear on the connected TV, To AV connector