Installing an AirPort Card

1Open the hinged connector panel and insert your card.

Remove the tape holding the antenna cable down.

Use this latch to release the hinged connector panel, and swing the panel open.

 

The AirPort Card is designed to

 

fit into the connector only one way.

AirPort Card connector

Insert the card until it is firmly seated.

2Plug in the antenna cable and close the hinged connector panel.

Slip the clear plastic tab attached to the AirPort Card behind

this component.

Plug the antenna cable into the hole in the end of the AirPort Card.

If you want to remove the AirPort Card, press this tab to lower the two catches holding the card in place.

Tuck the excess antenna cable into this opening so that it

won’t get snagged when you reinstall the core into the enclosure.

66 Chapter 4

Page 66
Image 66
Apple G4 manual Installing an AirPort Card, Open the hinged connector panel and insert your card