)WEEKLY Button enables timer recording of weekly serials. ☞ pg. 13, 15
qAUX Button selects recorder's auxiliary input mode. ☞ pg. 24
w Button engages
☞pg. 13, 15
eDATE +/– Button inputs date of programme for timer recording. ☞ pg. 14
rTV PROG +/– Button — same as button on recorder. ☞ pg. 10
t30 SEC Button initiates a
yAuto Tracking Button enables/disables auto
tracking mode during playback ☞ pg. 20
SP/LP () Button selects tape speed. ☞ pg. 10
uPlay Button — same as button on recorder. ☞ pg. 8, 9
iFast Forward Button — same as button on recorder. ☞ pg. 8, 9
oPause Button — same as button on recorder. ☞ pg. 9
pOK Button enters selections made in
Q @ #Button initiates functions such as Index Search ☞ pg. 17,
TV
47
How To Use
The remote control can operate most of your video recorder's functions, as well as basic functions of JVC TV sets. (See below.)
●Point the remote control toward the sensor window.
●The maximum operating distance of the remote control is about 8 m.
Operating JVC TVs
To operate your TV, while holding down the TV button, press the corresponding button: STANDBY/ON , TV/
VCR, TV PROG +/–, TV +/–, (TV Muting).
NOTES:
●When inserting the batteries, be sure to insert in the correct directions as indicated under the battery cover.
●Depending on the type of JVC TV, there may be cases where some or all functions cannot be operated using the remote control.
●If the remote control doesn't work properly, remove its batteries, wait a short time, replace the batteries and then try again.