JVC Model HR-J660EK Access Main Menu, Access Mode SET, Select Picture Control SET Mode, Manually

20ADVANCEDOPERATIONS(cont.)

Playback Pic- ture Adjustment

Picture Control

This feature helps you to adjust the playback picture quality according to your preference. *The default setting is "AUTO."

ACCESS MAIN MENU

SCREEN

1

MENU

0

?

3

4

TV PROG

OK

1 Press MENU.
	ACCESS MODE SET
	SCREEN
	Move the highlighted bar (pointer) to "MODE SET" by
2 pressing %Þ, then press OK or #.
	SELECT PICTURE
3	CONTROL SET MODE
	Move the highlighted bar	MODE SET
	(pointer) to "PICTURE	ON
	B. E. S. T.

Manual Tracking

Your video recorder is equipped with automatic tracking control. For most tapes this will automatically adjust the tracking to suit the particular tape you are playing. In some circumstances it may be necessary to make manual tracking adjustments. This is usually only associated with old or worn tapes or recordings made on old or worn recorders. If the automatic tracking control fails to operate correctly you will see noise bars across the picture as shown on the left below. To correct this you can override the automatic control and adjust the tracking manually by pressing the TV PROG buttons.

OVERRIDE AUTOMATIC TRACKING

1	Press	on the remote to engage manual tracking.
	ADJUST TRACKING
2	MANUALLY
	Press TV PROG + or – to adjust tracking.
	RETURN TO AUTOMATIC
	TRACKING
	Press	on the remote to re-engage automatic
3 tracking.

NOTE:

CONTROL" by pressing
	PICTURE CONTROL	AUTO
%Þ, then press OK or #to
	AUTO TIMER	OFF
select the desired mode.	O. S. D.	ON
AUTO: Provides optimised	AUTO SP=LP TIMER	OFF
picture benefits of
B.E.S.T. Picture	[5°] =
System. Normally	[MENU] : EXIT
select AUTO.
EDIT: Minimizes picture degradation during editing
(recording and playback).
SOFT: Reduces image coarseness when viewing
overplayed tapes containing a lot of noise.
SHARP: Clearer, sharper-edged picture when viewing
images with lots of flat, same-coloured surfaces
such as cartoons.

NOTES:

●When you select EDIT, SHARP or SOFT, the selected mode will not change until you select again.

●When you select EDIT to dub tapes, be sure to select AUTO after you finish dubbing the tapes.

RETURN TO NORMAL

SCREEN

4 Press MENU.

NOTES:

●When B.E.S.T. is OFF, "PICTURE CONTROL" switches automatically from AUTO to NORM.

●Select EDIT when you are dubbing tapes. Refer to page 24.

When a new tape is inserted, the recorder returns to the automatic tracking mode automatically.