Aiwa XR-MD95 Registering The Disc Title And Track Title, 0000, character, then press the * button

REGISTERING THE DISC TITLE

AND TRACK TITLE

You can register the titles of the discs and tracks.

The registered disc title can be displayed by pressing the DISPLAY button in the MD stop mode.

The registered track title can be displayed by pressing the DISPLAY button while the track is being played.

0000 0

[[in__-_=@ll

t

ENTER

MD MODE

VOUMULT “1JOG

MD

1 Press the MD button on the control panel and load an MD to register the disc or track title.

2 To register a disc title, press the MD MODE button in stop mode.

“Disc title” is displayed for 10 seconds.

To register a track title, select a track to register

the title using the ++ or - button. Then press the MD MODE button.

“Title” is displayed for 10 seconds,

Example: When registering a title for the 3rd track

3 Within 10 seconds, press the ENTER button.

The system turns into character entry mode.

4 Press the MD MODE button repeatedly to select the kind of character.

Each time the MD MODE button is pressed, the kind of character changes in the following order.

!
~ Capital letters+	Small letters+	Numbers/J
(A)	(a)	symbols (0)

5 Turn the VOL/MULTl JOG dial to select a desired

character, then press the * button.

When you press the ➤> button, the selected character moves

one column to the left.

6 Repeat steps 4 and 5 to enter all the required characters (up to 50 characters).

If you leave the unit without performing any operation for one minute in steps 4 and 5, the character entry mode will be canceled. If this happens, repeat from step 2.

7 Press the ENTER button.

8 Remove the MD from the unit.

“TOC Edit” is displayed and the entered title is registered.

22 ENGLISH