Aiwa XR-MD95 manual Extended Monaural Recording, Within 4 seconds, press the ENTER button

EXTENDED (MONAURAL)

RECORDING

8 Within 4 seconds, press the ENTER button.

9 Within 4 seconds, turn the VOL/MULTl JOG dial to select an index mark mode.

Twice as long as the time printed you select the monaural recording

on the MD can be obtained if mode.

To register index marks automatically at the beginning of each track, select “Mk:AUTO?”.

To register index marks every 5 minutes, select “Mk:TIME?”. To record without index marks, select “Mk:OFF?”.

drive

■ENTER

MD REC

II

MD MODE

Function

VOL/MULTl JOG

buttons

1 Load a recordable MD into the disc drive with the

label side up and in the direction of the arrow.

2Press one of the function buttons on the control panel and prepare the source to be recorded.

●To record from the radio, press the TUNER/BAND button and tune in to a station.

●TO record from equipment connected to the TAPE IN jacks, press the TAPE/AUX button repeatedly so that “TAPE” is displayed.

●TO record from equipment connected to the AUX IN jacks, press the TAPE/AUX button repeatedly so that “AUX” is displayed.

-To record from a CD, press the CD button and load a CD.

3 Press the MD MODE button twice

“REC MODE?” is displayed for 4 se=:

4 Within 4 seconds, press the ENTER button.

5 Within 4 seconds, turn the VOL/MULTl JOG dial so that “REC mono?” is displayed.

6 Within 4 seconds, press the ENTER button.

“MONO” flashes on the display.

7 Press the MD MODE button.

“Mark MODE?” is displayed for 4 seconds.

10 Within 4 seconds, press the ENTER button.

11 Press the MD REC button.

The unit enters the standby mode. Wait until the recordable time on MD flashes on the display.

12 Press the 11 button to start recording.

When recording from connected equipment, start playback of the connected equipment.

To stop recording

Press the ■ button,

When recording stops, “TOC Edit” is displayed and the contents (TOC) of the recording are recorded on the MD.

The extended recording mode is also canceled.

To add index marks during recording

Press the ENTER button, and an index mark is registered regardless of the index mark mode selected at step 9.

To record on a previously recorded MD

If there is an unrecorded section left on the MD, the new recording automatically starts from where the previous recording finished. If you want to start recording from the beginning of a previously

recorded MD, erase the previous recording completely. (See page 26.)

ENGLISH 21