Aiwa XR-MD95 manual Recording From The Radio A Cd Or Connected Equipment, Press the MD MODE button

RECORDING FROM THE RADIO,

A CD OR CONNECTED

EQUIPMENT

■	DISPLAY
MD REC	ENTER
II	MD MODE
Function	VOL/MULTl JOG
buttons

1 Load a recordable MD into the disc drive with the label side up and in the direction of the arrow.

2Press one of the function buttons on the control panel and prepare the source to be recorded.

. To record from the radio, press the TUNER/BAND button and tune in to a station.

●To record from equipment connected to the TAPE IN jacks, press the TAPE/AUX button repeatedly so that “TAPE” is

displayed.

o To record from equipment connected to the AUX IN jacks, press the TAPE/AUX button repeatedly so that “AUX” is displayed.

. To record from a CD, press the CD button and load a CD,

3 Press the MD MODE button.

‘“MarkMODE?” is displayed for 4 seconds.

4 Within 4 seconds, press the ENTER button.

5 Within 4 seconds, turn the VOL/MULTl JOG dial to select an index mark mode.

To register index marks automatically at the beginning of each track, select “Mk:AUTO?”.

To register index marks every 5 minutes, select “Mk:TIME?”. To record without index marks, select “Mark: OFF?”.

6 Within 4 seconds, press the ENTER button.

7 Press the MD REC button.

The system enters the standby mode. Wait until the recordable time on MD flashes on-the display.

8 Press the 11 button to start recording.

When recording from connected equipment, start playback of the connected equipment.

To stop recording

Press the ■ button,

When recording stops, “TOC Edit” is displayed and the contents (TOC) of the recording are recorded on the MD.

To add index marks during recording

Press the ENTER button, and an index mark is registered regardless of the index mark mode selected at step 5.

To record on a previously recorded MD

If there is an unrecorded section left on the MD, the new recording automatically starts from where the previous recording finished. If you want to start recording from the beginning of a previously

recorded MD, erase the previous recording completely. (See page 26.)

To change the display during recording

Press the DISPLAY button. With each press of the button, the display changes in the following order.

o	Track number and	elapsed time on MD
	(Example: MD5Tr	1 :23)

@Recordable time on MD

[		(Example:	MD	-36:15)
	@	Source
		(Example:	FM	93.00 MHz)

20 ENGL/SH