Aiwa XR-MD95 Setting The Sleep Timer, Connecting Optional Equipment, Tape In Jacks, Aux In Jacks

Models: XR-MD95

1 100
Download 100 pages 2.54 Kb
Page 28
Image 28
SETTING THE SLEEP TIMER

SETTING THE SLEEP TIMER

SHIFT

The unit can be turned off automatically at a specified time.

Use the remote control.

7Press the SLEEP button while pressing the SHIFT button on the remote control.

2 Within 4 seconds, press the ++ or B button to specify the time until the power is turned off.

Each time the button is pressed, the time changes between 5

and 240 minutes in 5-minute steps.

Specified time

To check the time remaining until the power is turned off

Press the SLEEP button once while pressing the SHIFT button on the remote control. The remaining time is displayed for 4 seconds.

To cancel the sleep timer

Press the SLEEP button twice while pressing the SHIFT button on the remote control so that “SLEEP OFF is displayed,

CONNECTING OPTIONAL

EQUIPMENT

TAPE IN

AUX IN

LINE OUT

SUPER WOOFER

Refer to the operating instructions of the connected equipment for details.

The connecting cords are not supplied. Obtain the necessary connecting cords.

Consult your local Aiwa dealer for optional equipment.

TAPE IN JACKS

This system can input analog sound signals from a tape deck through these jacks.

Use a cable with RCA phono plugs to connect a tape deck.

m

When using a tape deck to record the sound of this system, connect the tape deck to the LINE OUT jacks (see below),

AUX IN JACKS

This system can input analog sound signals through these jacks. Use a cable with RCA phono plugs to connect audio equipment (turntables, LD players, VCRs, TV, etc.).

Connect the red plug to the R jack, and the white plug to the L jack.

When connecting a turntable

Use anAiwa turntable equipped with a built-in equalizer amplifier.

LINE OUT JACKS

This system can output analog sound signals for all functions through these jacks.

Use a cable with RCA phono plugs to connect audio equipment.

m

Do not connect equipment to the LINE OUT jacks and AUX IN jacks simultaneously.

Otherwise, noise is generated and malfunctions may occur.

SUPER WOOFER q JACK

Connect an optional powered sub woofer with a built-in-amplifier to the jack.

28 ENGLISH

Page 28
Image 28
Aiwa XR-MD95 manual Setting The Sleep Timer, Connecting Optional Equipment, Tape In Jacks, Aux In Jacks, Line Out Jacks