Ricoh R40 manual Changing the Display, Maximizing the LCD Monitor Brightness, Term, Grid Guide

Changing the Display

Pressing the DISP. button allows you to change the screen display mode and toggle the information displayed on the LCD monitor. Each time you press the DISP. button, the display changes in the following order: Histogram, Grid Guide, No Display, LCD Monitor Off, and Normal Symbol Display.

Normal Symbol Display Histogram Grid Guide

Press the DISP. button to change the display.

LCD Monitor Off	No Display
(Synchro-Monitor Mode)

Maximizing the LCD Monitor Brightness

Hold the DISP. button down to maximize the display brightness.

When the brightness is at the maximum setting, holding the DISP. button down returns the brightness to the level set in [LCD BRIGHTNESS] (P.112).

Term

Grid Guide

This displays auxiliary lines on the LCD monitor to help you compose your picture. These lines are not recorded with images.

Synchro-Monitor Mode

This turns the LCD monitor off except when the camera is operated. This mode is effective for saving power consumption. In this mode, pressing the shutter release button halfway turns the LCD monitor on. Subsequently, pressing the shutter release button fully displays the shot image on the LCD monitor and then turns the LCD monitor off.

Quick Guide

25