Problem

Cause

Solution

Refer to

 

 

 

 

Cannot charge the

Battery has reached the end of its

Replace with a new rechargeable

P.16

battery.

useful life.

battery.

 

 

 

 

 

Battery runs out quickly.

It is being used at extreme high or low

-

-

 

temperatures.

 

 

 

 

 

 

 

Many shots are being taken in dark

-

-

 

places or other location requiring

 

 

 

extensive use of flash.

 

 

 

 

 

 

Shooting

 

 

 

Problem

Cause

Solution

Refer to

 

 

 

 

 

 

The camera does not

Battery is not loaded or is exhausted.

Charge the rechargeable battery or

P.16

 

shoot even if you press

 

use the AC adapter.

P.20

 

the shutter release button.

 

 

P.169

 

 

 

 

 

 

 

The camera is not on.

Press the POWER button to turn the

P.22

 

 

 

camera on.

 

 

 

 

 

 

 

 

The camera is in Playback Mode.

Press the 6 (Playback) button.

P.42

 

 

 

 

 

 

 

The shutter release button is not

Press the shutter release button all

P.29

 

 

pressed all the way.

the way.

P.30

 

 

 

 

 

 

 

The SD memory card is not

Format the card.

P.110

 

 

formatted.

 

 

 

 

 

 

 

 

 

The SD memory card is full.

Load a new card, or delete unwanted

P.20

Troubleshooting

 

 

files.

P.49

 

 

 

 

 

 

 

 

 

The SD memory card has reached

Load a new memory card.

P.20

 

 

the end of its useful life.

 

 

 

 

 

 

 

 

 

The flash is charging.

Wait until the auto focus/flash lamp

P.36

 

 

 

stops blinking.

 

 

 

 

 

 

 

 

The SD memory card is locked.

Unlock the card.

P.18

 

 

 

 

 

 

 

The contact surface of the SD

Wipe with a soft, dry cloth.

-

 

 

memory card is dirty.

 

 

 

 

 

 

 

 

Unable to view the shot

The image confirmation time is too

Lengthen the image confirmation

P.117

 

image.

short.

time.

 

 

 

 

 

 

 

Images do not appear on

The camera is not on or the LCD

Turn the camera on or adjust the

P.22

 

the LCD Monitor.

monitor is dark.

brightness of the LCD monitor.

P.112

 

 

 

 

 

 

 

The VIDEO/AV cable is connected.

Disconnect the VIDEO/AV cable.

P.47

 

 

 

 

 

 

 

The screen display is in

Press the DISP. button to change the

P.25

 

 

Synchro-Monitor Mode.

display.

 

 

 

 

 

 

 

Although the camera is

The lens or AF Window is dirty.

Wipe clean with a soft, dry cloth.

P.12

 

set to Auto Focus, it is

 

 

 

 

The subject is not in the center of the

Shoot with Focus Lock.

P.32

 

unable to focus.

 

shooting range.

 

 

 

 

 

 

 

 

 

 

 

 

 

It is a hard-to-focus subject.

Shoot with Focus Lock or Manual

P.32

 

 

 

Focus.

P.64

 

 

 

 

 

 

161

Page 163
Image 163
Ricoh R40 manual Shooting, 161