Ricoh R40 manual Registering the Power-on Settings, REG. MY Settings, Registering My Settings

Registering the Power-on Settings

(REG. MY SETTINGS)

The My Setting function allows you to make your desired settings to be used at power-on. For example, when a digital camera is used in common by multiple persons, each person can use the camera without regard to the settings made by the person who used the camera previously because the camera settings are restored to the administrator settings each time the camera is turned on.

Two types of my settings can be registered.

Registering My Settings

To register the current camera settings as my settings, follow the steps below.

1. Change the camera settings to the settings to be registered as my settings.

2. Display the SETUP menu.

For the operating procedure, see P.109.

3. Press the " button to select [REG. MY SETTINGS] and press the $ button.

A confirmation message appears.

4. Select [SETTING1] or [SETTING2] and press the C/Dbutton.

The current camera settings will be registered.

If you do not want to register them, press the DISP. button.

5. Press the C/Dbutton.

130