Ricoh R40 manual Disconnecting the Camera from Your Computer

3. Select [RICOH Gate La], check [Always use this program for this action] check box, and then click [OK].

To load images from the camera with

assistance from the Windows XP “Scanner and Camera Wizard”, select [Microsoft Scanner and Camera Wizard].

Leaving the [Always use this program for this action] check box unchecked will cause the [Caplio R4] screen to be displayed each time you transfer images from the camera, thereby allowing you to choose whether to use [RICOH Gate La] or the [Microsoft Scanner and Camera Wizard] for image transfers.

If your PC is installed with Windows XP Service Pack 2 and a warning message is displayed, see P.165.

Disconnecting the Camera from Your Computer:

1. Turn your camera off by pressing the POWER button.

2. Unplug the USB cable.

Note

•If the computer does not recognize the camera, uninstall the software (P.151) and install it again.

•When downloading images from your camera, be sure to use a fully charged rechargeable battery in the camera. Use of the AC adapter (sold separately) is recommended.

Reference

•For how to turn the camera on/off, see P.22.

•For details about [USB CONNECTION] (MASS STR/ORIGINAL), see P.125.

Installing Software

145