Ricoh R40 manual About the Software Other Problems

About the Software

For details about the software, refer to the “Software User Guide” (PDF file).

Other Problems

Problem	Cause	Solution	Refer to
Cannot load the SD	The card is facing the wrong way.	Load correctly.	P.20
memory card.
The camera does not	Battery is running low.	Charge the rechargeable battery or	P.16
operate even when the		use the AC adapter.	P.19
buttons are pressed.			P.169
	Camera malfunction.	Press the POWER button to turn the	P.22
		camera off, and then press the
		POWER button to turn the camera on
		again.
		Remove the battery and load it again.	P.20
		Reconnect the AC adapter cable	P.169
		properly, if using.
The date is incorrect.	The correct date/time are not set.	Set the correct date/time.	P.120
The set date disappeared.	The battery was removed.	If the battery is removed for about one	P.120
		week, the date setting will be lost.
		Make the settings again.
Auto Power Off does not	Auto Power Off is set to [OFF].	Set the time for Auto Power Off.	P.114
work.
The beep sound cannot	The beep sound volume is turned off.	Use [VOL. SETTINGS] to set the	P.116
be heard.		volume to a setting other than mute.
Images do not appear on	The VIDEO OUT MODE setting is	Set it to the correct format.	P.122
the TV.	incorrect.
	The AV cable is not connected.	Connect the AV cable properly.	P.47
	The TV is not correctly set to VIDEO	Check that the TV is correctly set to	-
	IN.	VIDEO IN.

164