Ricoh R40 Setting the Date and Time, Press the !#$ buttons to set the year, month, date and time

Setting the Date and Time

When the power is turned on for the first time, the date/ time setting screen appears.

1. Press the !"#$ buttons to set the year, month, date and time.

Change the value with !" and move the frame with #$.

Setting at shipping

2. In [FORMAT], choose the date and time format.

Select the date and time format with !".

3. Check the display and then press the C/Dbutton.

The date is set.

Pressing the DISP. button on this screen allows you to cancel the setting.

Note

•If the battery is removed for more than one week, the date and time settings will be lost. These settings must be made again.

•To retain the date and time settings, load a fully charged battery for more than two hours.

Reference

•For information on how to set the date and time, see P.120.

•For information on how to put a date stamp on each frame, see P.77.

24