Ricoh R40 manual Setting the Date and Time Date Settings

Models: R40

1 185
Download 185 pages 43.72 Kb
Page 122
Image 122

Setting the Date and Time (DATE SETTINGS)

You can take still images with the time or date stamped onto the picture.

The date/time setting on the SETUP menu is explained here.

1. Display the SETUP menu.

For the operating procedure, see P.109.

2. Press the " button to select [DATE SETTINGS] and press the $ button.

3. Press the !"#$ buttons to set the year, month, date and time.

You can press and hold down the !" button to quickly raise or lower the setting.

4. In [FORMAT], choose the date and time format.

5. Check the information on the screen and then press the C/Dbutton.

Once you have set the date and time, the display returns to the SETUP menu.

Note

If the battery is removed for more than one week, the date and time settings will be lost. These settings must be made again.

To retain the date and time settings, load a fully charged battery for more than two hours.

120

Page 122
Image 122
Ricoh R40 manual Setting the Date and Time Date Settings