Ricoh R40 manual Using Scene Modes with Functions, Disconnecting the AC Adapter

Caution

•Use the AC adapter with the battery/card cover open. Do not close the cover forcibly.

•The camera cannot be used with a tripod.

•Be sure to securely connect the AC adapter cord and plug.

•When you are not using the camera, unplug the AC adapter from the camera and the power outlet.

•If you disconnect the AC adapter from the camera or the plug from the outlet while the camera is in use, data may be lost.

•When using the AC adapter, the battery level indication may not reach the full area.

Disconnecting the AC Adapter

Make sure the camera is turned off before disconnecting the AC adapter.

1.

2.

3.

Unplug the power plug from the outlet.

Remove the AC adapter coupler from the camera. Close the battery/card cover and slide it back into place.

C. Using Scene Modes with Functions

Depending on the Scene Mode, the operation of functions may differ from when in normal shooting mode. Refer to the table below.

Scene Mode	Flash	Macro Shooting
PORTRAIT	Initial setting: FLASH OFF	Disabled
SPORTS	Initial setting: FLASH OFF	Disabled
LANDSCAPE	Fixed to [FLASH OFF]	Disabled
NIGHTSCAPE	[FLASH ON] is disabled	Disabled
	Initial setting: AUTO
TEXT MODE	Initial setting: FLASH OFF	Enabled
HIGH SENS	Initial setting: FLASH OFF	Enabled
ZOOM MACRO	Initial setting: FLASH OFF	Macro shooting only
SKEW COR MODE	Initial setting: FLASH OFF	Enabled

170