Ricoh R40 manual Switch the Mode Selector to Press the C/Dbutton

Note

•When shooting with S-CONT or M-CONT, the ISO setting is fixed at [AUTO] even if it is set to [ISO 64] or [ISO 100].

•The maximum number of images that can be shot in the Multi-Shot Mode depends on the image size setting, as shown in the table below.

•The numbers of images that can be shot in the Multi-Shot Mode with the internal memory are as shown in the table below.

	F2816	N2816	F3:2	F2048	N2048	F1280	N1280	N640
Digital Zoom: Off	5	5	5	5	5	13	13	13
Digital Zoom: On	5	5	5	5	5	13	13	13

•The shot images can be recorded normally until the SD memory card becomes full. Once the number of consecutively shot images exceeds the number of images shown in the table above, however, the image recording speed becomes slow. (This depends on the image size setting.)

1. Switch the Mode Selector to 5.

2. Press the C/Dbutton.

The Shooting Setting menu is displayed.

3. Press the " button to select [CONT. MODE] and press the $ button.

4. Press the !" buttons to select [CONT.], [S-CONT], or [M-CONT].

5. Press the C/Dor # button.

6. If you pressed the # button in Step 5, press also the C/Dbutton.

The Shooting Setting menu closes and the Multi-Shot symbol appears on the screen.

88