JVC Comprehensive Laptop Speicher Guide for Maintenance and Repairs

(6)Remove one latch c on the rear side of the main body, and release the four joints d while moving the top case in the rear direction.

3.1.4Removing the main board (See Figure 11 and Figure 12)

•Prior to performing the following procedure, remove the key- board assembly, the top case, and the LCD panel assembly.

(1)Remove one screw D (short), one screw E (long), attaching the main board.

Screw D : 13-MAKXC060W(M2 x 6L(K)W-NI)

Screw E : 13-MAKXC100W(M2 x 10L(K)W-NI)

(2)Lift the main board while pushing the microphone and headphone jack in the direction indicated by the arrow, and remove the main board.

CAUTION:

•In attaching the main board, put the lever of the PCMCIA slot through the bottom case, and then push and attach the mi- crophone and headphone jack.

•Be careful not to damage the battery detector switch on the backside of the main board.

Latch c

Fig.9

Top case

Bottom case	Joint d
	Fig.10

Main board

D

2

1

E

Fig.11

	Microphone and
Main board	headphone jack

Battery detector switch

2

1

Bottom case

Fig.12

(No.XE007)1-5