CAUTION: If recordings you have made have excessive noise or static, the Unit may be too close to a TV which was on during the recording. Either turn off the TV or increase the distance between the TV and the System.

Standard Recording

This is the basic method for recording any source. The System also has special ways for recording CD to tape, and tape to tape, which save you time and effort, as well as give you some special effects. However, when you need to add a selection to a tape you have made, or are combining selections from several sources on one tape, use the method described below; just substitute the source you want into this procedure, such as a CD or the Tuner. You can also record from auxiliary source with this procedure.

Using the Unit

1.Insert a blank or erasable tape into Deck B.

2.Press the REVERSE MODE button if you want to record on both sides of the tape.

Press the button until the “ ” or “ ” indicator is lit.

When using the auto reverse mode, insert the tape so that it will be recorded in the forward (3) direction.

3.Check the recording direction for the tape.

Check that the Tape Direction indicator is the same as that for the tape in the tape deck. If the directions are different, press the 7STOP button after pressing the TAPE ª £ button to set the tape direction.

When using the auto reverse mode to record both sides of a tape, check that the Tape Direction indicator is in the forward (3) direction. If the direction indicator is not in the forward (3) direction, press the TAPE ª £ button then press the 7STOP button.

4.Prepare the source, for example, by tuning in a radio station, load- ing CDs, or turning on connected equipment.

5. Press the REC START/STOP button.

The REC indicator lights up and the System begins recording.

Using the Remote Control

1.Insert a blank or erasable tape into Deck B.

2.Press the REVERSE MODE button on the Unit if you want to record on both sides of the tape.

Press the button until the “ ” or “ ” indicator is lit.

When using the auto reverse mode, insert the tape so that it will be recorded in the forward (3) direction.

3.Prepare the source, for example, by tuning in a radio station, load- ing CDs, or turning on connected equipment.

REC PAUSE

4. Press the REC PAUSE ¦ button.

The REC indicator blinks.

5. Press the ª or £ button.

Recording starts in the direction of the button pressed.

The REC indicator stops blinking and remains lit.

When using the auto reverse mode to record both sides of a tape, press the £ button.

Notes for using Reverse Mode for recording

When recording in Reverse Mode, the System automatically stops when it reaches the end of the reverse (2) direction. To record on both sides of a tape, make sure that the recording direction for the tape inserted into Deck B is forward (3), and that the Tape Direction indicator is also forward (3), before you start recording.

To Pause at Any Time During the Recording Process

Press the REC PAUSE ¦button on the Remote Control. Then press either the ªor £ button on the Remote Control or REC START/STOP button on the Unit to restart recording.

To Stop at Any Time During the Recording Process

Press the REC START/STOP button on the Unit again, or press the 7 button on the Remote Control.

21

Page 23
Image 23
JVC MX-D302T manual Standard Recording

MX-D302T specifications

The JVC MX-D302T is a versatile and powerful mini stereo system that offers a comprehensive audio experience in a compact design. Designed for music lovers who appreciate both performance and convenience, this system combines advanced technologies with user-friendly features.

One of the standout features of the JVC MX-D302T is its impressive sound quality. The system is equipped with a total output power of 180 watts, which allows for rich, dynamic sound that can fill a room. The dual speaker design enhances the audio experience, delivering clear highs and deep bass, ensuring that every note, beat, and vocal is faithfully reproduced.

In terms of connectivity, the MX-D302T is highly versatile. It includes Bluetooth technology, enabling users to wirelessly stream music from their smartphones, tablets, or other compatible devices. This feature offers the convenience of playing music from popular streaming services without the need for physical connections.

Additionally, the stereo system includes a CD player, which is a nod to traditional audio formats for those who still enjoy their physical music collections. It supports various disc formats, providing flexibility for different listening preferences. The FM/AM tuner also allows users to enjoy their favorite radio stations, with presets available for easy access.

The design of the JVC MX-D302T is both modern and practical. Its sleek, compact form makes it an ideal fit for any space, whether in a living room, bedroom, or office. The intuitive interface, featuring easy-to-read buttons and a clear display, enhances usability, making it straightforward to navigate through different functions and settings.

Another significant characteristic is the inclusion of USB ports, which allow for direct digital playback from USB drives. This feature complements the existing connectivity options and makes it simple to access and play a library of digital music files.

The system’s sound-enhancing technologies, such as the equalizer presets, allow users to tailor the audio output according to their musical preferences. Whether it’s rock, pop, classical, or jazz, the customizable equalizer can enhance the listening experience by adjusting the sound to the listener's taste.

In summary, the JVC MX-D302T mini stereo system marries design and functionality, making it a solid choice for those seeking a rich audio experience in a compact package. With its powerful sound output, diverse connectivity options, and user-friendly features, it stands out as a reliable system for music enjoyment.