Chapter 2 - Printer Installation
This printer model has the following print modes:
Thermal Transfer (TT): When printing, ribbon must be installed to transfer the print contents onto the media.
Direct Thermal (DT): | When printing, no ribbon is necessary; it only requires direct thermal media. |
2-1. Ribbon Installation
1.Place the printer onto a smooth surface, and open the top cover.
2.Loosen and then lift the upper print mechanism by pressing the locking tenons.
3.Take out the ribbon supply shaft and rewind shaft.
4.Place the new ribbon roll onto the ribbon supply shaft.
5.Feed the ribbon from the Ribbon Supply Shaft under the Print Head.
6.Wrap the ribbon around the Ribbon Shaft and stick the ribbon onto the Empty Ribbon Roll Core.
7.Firmly close the upper print mechanism.
5
