BUSlink FALCON 4D manual Communication Interface, PIN no Function Transmitter

1-5. Communication Interface

Parallel Interface

Interface cable : Parallel cable compatible with IBM PC

Pin out	: See below
PIN NO.	FUNCTION	TRANSMITTER
1	/Strobe	host / printer
2-9	Data 0-7	host
10	/Acknowledge	printer
11	Busy	printer
12	/Paper empty	printer
13	/Select	printer
14	/Auto-Linefeed	host / printer
15	N/C
16	Signal Gnd
17	Chassis Gnd
18	+5V,max 500mA	host
19-30	Signal Gnd
31	/Initialize	host / printer
32	/Error	printer
33	Signal Ground
34-35	N/C	host / printer
36	/Select-in

Serial Interface
Serial Default	: 9600 baud rate, no parity, 8 data bits, 1 stop bit, XON/XOFF protocol and RTS/CTS
Setting

RS232 HOUSING (9-pin to 9-pin)

DB9 SOCKET				DB9 PLUG
---	1		1	+5V,max 500mA
	2		2
RXD				TXD
	3		3
TXD				RXD
	4		4
DTR				DSR
	5		5
GND				GND
	6		6
DSR				DTR
	7		7
RTS				N/C
	8		8
CTS				RTS
	9	9
RI				N/C
PC				PRINTER

NOTE: The total voltage output from parallel port and serial port altogether can not exceed 500mA.

USB Interface

Connector Type : Type B

PIN NO.	1	2	3	4
FUNCTION	USBVCC	D-	D+	GND

3