6 Select the preset station number. | PRESET |
|
Press 4 or ¢ to select the preset station number, then press SET.
The unit enters volume setting mode.
|
|
|
| SET |
7 Press 4or ¢to set the volume |
| |||
level. | PRESET | |||
• You can select the volume level from |
|
| ||
|
| |||
VOL MIN, VOL 1 – 30, and VOL |
|
|
| |
|
| |||
|
| |||
MAX. |
| |||
8 Press SET to complete the Daily | SET |
Timer setting. |
|
The DAILY (daily timer) indicator stops flashing and remains lit. The settings you have done are shown on the display in sequence for your confirmation.
Using Recording Timer
With Recording Timer, you can make a tape of a radio broadcast automatically. You can set the timer whether the system is on or off.
How Recording Timer actually works
The unit automatically turns on, tunes into the specified station, sets the volume level to “MIN,” and starts recording
when the 
indicator flashes while the timer is operating). Then, when the
The timer setting remains in memory until you change it.
•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.
•If you have made a mistake while setting the timer, press CANCEL. (However, this does not always work. If CANCEL does not work, press CLOCK/TIMER repeatedly and start from step 1 again.)
On the unit ONLY:
1 Put a recordable cassette into deck B.
2 | Press CLOCK/TIMER until | CLOCK |
/ TIMER |
“REC” appears on the display.
indicator lights up and the REC (recording timer) indicator also starts flashing
9 Press STANDBY/ON to
STANDBY
on the display.
turn off the unit (on standby) if you have set the Daily Timer with the unit turned on.
STANDBY/ON
If the unit is turned on when the
Daily Timer does not work.
To turn on or off Daily Timer after its setting is done
1 Press CLOCK/TIMER repeatedly until | / TIMER |
| CLOCK |
“DAILY” appears on the display. |
|
2 To turn off the Daily Timer, press
CANCEL.CANCEL
/DEMO
The DAILY (daily timer) indicator goes off from the display (“OFF” appears for a while). The Daily Timer is canceled, but the setting for the Daily Timer remains in memory.
To turn on the Daily Timer, press SET. | SET |
The DAILY (daily timer) indicator lights up on the display. The settings you have done are shown on the display in sequence for your confirmation.
•Each time you press the button, the timer setting modes change as follows:
DAILY |
|
| ON TIME |
|
| REC | |
|
|
|
| ||||
Canceled |
| CLOCK |
|
| ON TIME | ||
|
|
| |||||
|
| (See page 9.) |
|
|
| ||
3 Press CLOCK/TIMER again. | / TIMER |
| CLOCK |
“ON TIME” appears for 2 seconds, then the unit enters
– 19 –
