JVC MX-G50 manual Playing Back CDs, Loading CDs, Playing Back the Entire Discs Continuous Play

Playing Back CDs

Continued

This unit has been designed to playback the CDs: Audio CD, CD-R and CD-RW.

Continued use of irregular shape CDs (heart-shape, octagonal, etc.) can damage the unit.

When playing a CD-R or CD-RW

User-edited CD-Rs (Recordable) and CD-RWs (Rewritable) can be played back only if they are already “finalized”.

•You can play back your original CD-Rs or CD-RWs recorded in music CD format. (However, they may not be played back depending on their characteristics or recording conditions.)

•Before playing back CD-Rs or CD-RWs, read their instructions or cautions carefully.

•Some CD-Rs or CD-RWs may not be played back on this unit because of their disc characteristics, damage or stain on them, or if the player’s lens is dirty.

•CD-RWs may require a longer readout time. (This is caused by the fact that the reflectance of CD-RWs is lower than for regular CDs.)

Loading CDs

1 Press 0.

The unit automatically turns on and the carrousel comes out.

2 Place one or two discs correctly on the front slots of the carrousel, with its label side up.

CORRECT INCORRECT

•When using a CD single (8 cm), place it on the inner circle of the disc tray.

3	DISC CHANGE
	If you wish to load a third disc,

press DISC CHANGE on the unit or DISC SKIP on the remote

About the disc indicators

Each disc indicator corresponds to the disc tray of the same number.

Disc number

Disc indicator

Disc marker

•The disc marker lights up for the disc number you have selected.

•The disc indicator rotates while the corresponding CD is being played.

•The disc indicator goes off when the unit has detected that there is no CD on the corresponding disc tray.

Playing Back the Entire Discs — Continuous Play

You can play CDs continuously.

1 Load CDs.

2 Press one of the disc number buttons (CD1, CD2, and CD3) for the disc you want to play.

CD play starts from the first track of the selected disc.

Track number of the currently playing disc is flashing. (Track numbers exceeding 16 are not displayed.)

Track number Elapsed playing time

•Pressing CD 6 instead of the disc number buttons starts playing back if a CD is on the trays.

control.

DISC SKIP

When you turn on the unit, ALL DISC indicator lights up on the display automatically. If you do not want all the CDs to

The carrousel rotates by 120˚.

4 Press 0again.

The carrousel closes.

play back, select 1 DISC by pressing REPEAT.

ALL DISC 1 DISC REPEAT 1

REPEAT ALL DISC REPEAT 1 DISC

ALL DISC:	Plays all loaded CD.
1 DISC:	Plays back one CD.

To stop during play, press 7.

To remove the disc, press 0.

– 12 –