JVC MX-GA8 manual Using Recording Timer

6 Select the preset station number.

Turn the 4/¢ control to select the preset station number, then press SET. The unit enters volume setting mode.

SET

7 Turn the 4/¢ control to set the volume level.

• You can select the volume level from VOL MIN, VOL 1 — VOL 30, and VOL MAX.

WOOFER

8 Press SET to complete the Daily	SET
Timer setting.

The DAILY (daily timer) indicator stops

flashing and remains lit. The settings you have done are shown on the display in sequence for your confirmation.

9 Press	STANDBY/ON to turn	STANDBY
		STANDBY/ON
off the unit (on standby) if you
have set the Daily Timer with the
unit turned on.

If the unit is turned on when the timer-on time comes

Daily Timer does not work.

To turn on or off Daily Timer after its setting is done

1	Press CLOCK/TIMER repeatedly	CLOCK
	until “DAILY” appears on the display.	/ TIMER
2
	To turn off the Daily Timer, press
		CANCEL
	CANCEL/DEMO.	/ DEMO

The DAILY (daily timer) indicator goes off from the display (“OFF” appears for a while).

The Daily Timer is canceled, but the setting for the Daily Timer remains in memory until you change it.

To turn on the Daily Timer, press SET. SET

The DAILY (daily timer) indicator lights up on the display. The settings you have done are shown on the display in sequence for your confirmation.

Continued

Using Recording Timer

With Recording Timer, you can make a tape of a radio broadcast automatically. You can set the timer whether the unit is on or off.

How Recording Timer actually works

The unit automatically turns on, tunes in to the specified station, sets the volume level to “VOL MIN,” and starts recording when the on-time comes (the indicator flashes while the timer is operating). Then, when the off-time comes, the unit automatically turns off (stands by).

Recording Timer works only once, but the timer setting remains in memory until you change it.

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 2 again.

•If you have made a mistake while setting the timer, press CANCEL/DEMO. (However, this does not always work. If CANCEL/DEMO does not work, press CLOCK/TIMER repeatedly and start from step 2 again.)

On the unit ONLY:

1 Put a recordable cassette into deck B.

2 Press CLOCK/TIMER
	/ TIMER
	CLOCK
repeatedly until “REC”
appears on the display.

indicator lights up and the REC (recording timer) indicator starts flashing on the display.

WOOFER

•Each time you press the button, the clock/timer setting modes change as follows:

DAILY	ON TIME		REC
	(Daily Timer)
Canceled	CLOCK	ON TIME

(See page 9.) (Recording Timer)

3 Press CLOCK/TIMER again.
	/ TIMER
	CLOCK
“ON TIME” appears for 2 seconds, then

the unit enters on-time setting mode.

WOOFER

English

24