JVC MX-J206 Connecting Speakers, 2Insert the end of the speaker cord into the, terminal, English

English

AM antenna

1 2 3

Connecting Speakers

You can connect a pair of the front speakers.

1 2 3

	ANTENNA
	FM
FM
75	GND
AM
EXT	GND
	AM LOOP

Vinyl-covered wire (not supplied)

	Red
	CAUTION:
	SPEAKER IMPEDANCE
	6~16 OHMS
	SPEAKERS
Speaker	RIGHT	Speaker
		LEFT
		cord
cord
	Black

AM loop antenna (supplied)

1Connect the AM loop antenna to the AM LOOP terminals as illustrated.

2Turn the AM loop antenna until you have the best reception.

To connect an outdoor AM antenna

When reception is poor, connect a single vinyl-covered wire to the AM EXT terminal and extend it horizontally. (The AM loop antenna must remain connected.)

For better reception of both FM and AM

•Make sure the antenna conductors do not touch any other terminals and connecting cords.

•Keep the antennas away from metallic parts of the unit, connecting cords, and the AC power cord.

Right	Left
speaker	speaker

1Press and hold the clamp of the speaker terminal on the rear of the unit.

2Insert the end of the speaker cord into the

terminal.

Match the polarity of the speaker terminals: Red (+) to red (+) and black (–) to black (–).

3Release the finger from the clamp.

IMPORTANT: Use only speakers with the same speaker impedance as indicated by the speaker terminals on the rear of the unit.

– 9 –