JVC SP-MXJ200 Playing at Random Random Play, Prepare CDs, Select the Random play mode On the unit

English

To stop during play, press 7on the unit (or CD 7/CLEAR on the remote control).

To exit from program play mode

On the unit:

Press PROGRAM again before or after play so that the unit enters Continuous play mode.

On the remote control:

Press PLAY MODE repeatedly until all the CD play mode indicator go off from the display.

•The program you have made is stored in memory until you erase the program.

Playing at Random — Random Play

The tracks of all loaded CDs will play at random.

•To use Repeat play for Random play, press REPEAT after starting Random play.

1 Prepare CDs.

•If the current playing source is not the CD player, press CD 6, then 7on the unit (or CD 7/CLEAR on the remote control) before going to the next step.

2 Select the Random play mode.

On the unit:

RANDOM

To check the program contents

Before playing, you can check the program contents by pressing 4 or ¢on the remote control.

•¢: Shows the programed tracks in the programed order.

•4: Shows them in the reverse order.

To modify the program
Before play, you can erase the programed tracks	DEMO
shown on the display by pressing CANCEL.	CANCEL

•Each time you press the button, the programed track shown on the display is erased from the program.

To add tracks in the program before play, simply select the disc numbers and the track numbers you want to add by following steps 3 and 4 of the programming procedure on page 16.

To erase the entire program before or after play, press 7 on the unit (or CD 7/CLEAR on the remote control). “PROGRAM” appears on the display.

•Ejecting a CD will also erase the track numbers programed from the ejected CD.

If you try to program a 33rd step

“FULL” will appear on the display.

If your entry is ignored

You have tried to program a track from an empty tray, or a track number that does not exist on the CD (for example, selecting track 14 on a CD that only has 12 tracks). Such entries are ignored.

Press RANDOM.

1 2 3

RANDOM

On the remote control: PLAY MODE

Press PLAY MODE repeatedly until the RANDOM indicator lights on the display. Each time you press the button, the CD play mode changes as follows:

Program play = Random play =Continuous play

=(back to the beginning)

3 Press CD 6.

C D

The tracks are played at random. Random play ends when all the tracks are played once.

To stop during play, press 7on the unit (or CD 7/CLEAR on the remote control).

•Random play also stops when one of the disc trays is opened.

To exit from Random play mode, press RANDOM again before or after play so that the unit enters Continuous play mode.

Even if you press 4

You cannot go back to the previous tracks during Random play.

• If you press ¢, you can go to next random tracks.

– 17 –