JVC SP-MXJ300 Set the on-timeyou want the unit, Put a recordable cassette into deck B, English

English

4	Set the on-time you want the unit	– PRESET +
	to turn on.

On the remote control:

1)Press 4or ¢ to set the hour, then press SET.

2)Press 4or ¢ to set the minute, then press SET.

“OFF TIME” appears for 2 seconds, then the unit enters off-time setting mode.

SET

1	Put a recordable cassette into deck B.
2	Press SHIFT.	SHIFT
3	Press TIMER until “REC” appears	TIMER

5 Set the off-time you want the unit to turn off (on standby).

1)Press 4or ¢ to set the hour, then press SET.

2)Press 4or ¢ to set the minute, then press SET.

The unit enters preset station selecting mode.

–PRESET +

SET

on the display. 2

REC

The REC indicator also starts flashing on the display.

•Each time you press the button, the timer setting mode changes as follows:

6 Select the preset station. – PRESET +

DAILY = ON TIME = REC = ON TIME =

1) Press 4or ¢ to select the band (“TUNER FM” or “TUNER AM”), then press SET.

2)Press 4or ¢ to select a preset channel number, then press SET. The REC indicator stops flashing and remains lit. The settings you have done are shown on the display in sequence.

7 Press POWER to turn off the unit (on standby) if necessary.

If you want to listen to another source while recording.

SET

STANDBY

POWER

Clock setting (See page 11.) = Canceled

4 Press TIMER again.	TIMER
“ON TIME” appears for 2 seconds, then the	2
unit enters on-time setting mode.

REC

Press REC START/STOP to stop recording. Without stopping it, you cannot change the source.

To turn on or off Recording Timer after its setting is done

REC

1	Press CLOCK/TIMER repeatedly until
	“REC” appears on the display.
2	To turn off the Recording Timer, press
	CANCEL (on the unit only).
	The REC indicator goes off and “OFF” appears
	on the display.
	The Recording Timer is canceled, but the setting
	for the Recording Timer remains in memory.

CLOCK/TIMER

DEMO

CANCEL

5 Set the on-time you want the unit to turn on.

1)Press SELECT – or SELECT + to set the hour, then press SET.

2)Press SELECT – or SELECT + to set the minute, then press SET.

“OFF TIME” appears for 2 seconds, then the unit enters off-time setting mode.

– SELECT +

4 5

SET

8

To turn on the Recording Timer, press SET.

The REC indicator lights up on the display. The

settings you have done are shown on the display

in sequence for your confirmation.

SET

6 Set the off-time you want the unit to turn off (on standby).

1)Press SELECT – or SELECT + to set the hour, then press SET.

2)Press SELECT – or SELECT + to set the minute, then press SET.

The unit enters source selecting mode.

– SELECT +

4 5

SET

8

– 25 –