Using the Timers
Preparation for each music source:
Perform the following operation according to the music source you have selected. Then, the System enters Volume Setting mode.
When selecting TUNER FM or TUNER AM:
Turning the Daily Timer On and Off
Once you have set the Daily Timer, it is stored in memory. So, the Daily Timer will be activated at the same time every day until it is canceled.
Press the 4 or ¢ button to select the preset station number, then press the SET button.
When selecting – CD – – –:
1.Press the 4 or ¢ button to select the disc number, then press the SET button.
Each time you press the button the disc number changes as follows:
– CD – – – =1CD – –
2.Press the 4or ¢button to select the track number, then press the SET button.
Please set the disc number to which you have listened at the last time. CD playback does not start if you select other disc number.
Example: 2CD – 12 (Disc number 2, Track number 12)
In this example, CD2 is selected as it was played back at the last time. If you select other CD number, the Daily Timer
does not work at the set time.
When selecting TAPE:
Insert a cassette tape you want to play into Deck A.
When selecting AUX:
Prepare the external equipment so that it will turn on at the ON time set by the System.
To allow this, the equipment should have the timer function.
To cancel the Daily Timer temporarily:
1 Press the CLOCK/TIMER button on the Unit repeatedly until the “DAILY” appears on the display.
2 Press the CANCEL button on the Unit.
The “DAILY” indicator goes out and “OFF” appears on the display.
The Timer indicator ( 
) and “DAILY” indicator go out and the Daily Timer is canceled temporarily.
To activate the cancelled Daily Timer:
1 Press the CLOCK/TIMER button on the Unit repeatedly until the “DAILY” appears on the display.
The “DAILY” indicator blinks and the Timer indicator ( 
) lights up on the dispaly.
2 Press the SET button on the Unit.
The “DAILY” indicator remains lit. Each setting already made appears on the display in the order of ON time, OFF time, mu- sic source and volume, and then the display returns to the orig- inal display.
6 Setting the volume level.
Press the 4 or ¢ button to select the volume level. VOL – –
CAUTION:
•If the System is unplugged, or a power failure oc- curs, the timer setting will be lost in a few days. You will need to reset the clock first, then the timer.
DAILY
7 Press the SET button.
The timer setting is completed, and the “DAILY” indicator stops blinking and remains lit. Each setting you have made ap- pears on the display in the order of ON time, OFF time, music source and volume. Then, the display returns to the display be- fore you set the Timer.
8 Press the % STANDBY/ON button to turn off the System.
The Timer indicator ( 
) and “DAILY” indicator are lit on the display, showing that the Daily Timer is set to on.
To change the timer setting, repeat the setting procedure from the beginning.
When the timer ON-time comes:
The following operation will be automatically repeated every day.
•When the timer 
) blinks during timer operation.
•When the timer 
) remains lit on the display.
•If the System is already on when the timer
Setting the REC (Recording) Timer
With the Recording Timer, you can make a tape of a radio broad- cast automatically whether or not you are home.
•You can set the REC Timer whether the System is on or off.
•The volume level is automatically set to MIN when REC Timer is used.
•Perform each setting within 35 seconds. Otherwise, set- ting will be cleared and the procedure must be repeated from the beginning.
•If you have made a mistake while setting the timer, press the CANCEL button on the Unit. However, this does not al- ways cancel the current setting. If the CANCEL button does not work, press the CLOCK/TIMER button on the Unit repeatedly until the display returns to the original dis- play, and start from the first step.
22
